Topic Replies Activity
Arria 10 : max1619 temperature sensor 6 October 9, 2019
Ethernet not working after reboot 6 October 8, 2019
Failing eth on atlas-soc. Updated board_info file? 4 October 8, 2019
Make_sdimage.py - Error: Failed to copy [Solved] 2 May 28, 2018
Linux Error Adding Additional EMACs to Stratix 10 HPS 1 October 4, 2019
Altera MAX10 10M50 Rev C linux issue 1 October 4, 2019
Arria 10: Warm Reset Error 1 September 13, 2019
Unable to clone project from git 3 September 11, 2019
PHP install on angstrom 2 September 11, 2019
HPS DDR3 assigments 3 September 10, 2019
Linux Console problem 1 September 5, 2019
Timing issue with arria 10 2 September 5, 2019
Avalon FIFO status pointers not working 1 September 2, 2019
Change UBOOT terminal from UART0 to UART1 10 August 31, 2019
Arria 10 :HPS booting using DDR3 1 August 31, 2019
Arria 10 : Uboot settings 1 August 30, 2019
Linux driver for intelFPGA PLL Reconfiguration IP 1 August 29, 2019
Kernel Panic after SDRAM EDAC enable 1 August 29, 2019
BSP and U-boot Upgrade with Quartus Version Upgrading 1 August 27, 2019
Using devmem2 to write to a register hangs the Stratix 10 1 August 27, 2019
Linux kernel build process failures 3 August 27, 2019
Dump value from FIFO read data pointer HPS FIFO 1 August 27, 2019
Arria 10 : Programming Si5338 Clock 1 August 26, 2019
Interrupt from FPGA received only once! 1 August 25, 2019
Linux Booting stuck at STARTING LIGHTTPD WEBSERVER 8 August 23, 2019
Cyclone V LCD controller framebuffer driver 1 August 23, 2019
Why I can't control the LED? "Failed opening fifo frequency_fifo_scroll" 4 August 23, 2019
Cyclone V: SDRAM Window Boundary in MPU Address space 1 August 21, 2019
Cyclone V: Running bare-metal from SDRAM memory. Error 1 August 21, 2019
Arria 10 : Kernel Configuration Setting for customised board 1 August 21, 2019