I am new for Cyclone V (DE0-Nano Soc) board. I am software engineer and I am planning to build external SD card image for embedded product. To learn more about process, I started with “GSRD v16.0 - User Manual - Arrow SoCKit Edition”. I installed Ubuntu 16.04.2 Desktop version on Virtual box, installed Altera Quartus prime light 16.0 edition and installed Intel SoC FPGA Embedded Development Suite 16.0 standard version. After that I started with 1st step by following “Compile Hardware Design 16.0 Arrow SoCKit Edition”; I able to finish till step 15. But I am getting bellow error in step 16: start “Analysis and Synthesis”.
Error (265013): Can’t open SignalTap II Logic Analyzer. Verify that the license file exists and is stored in the correct location. If you are using the Quartus Prime Lite Edition software, you must turn on the TalkBack feature to use the SignalTap II Logic Analyzer.
Error (12154): Can’t elaborate inferred hierarchy “sld_hub:auto_hub”
Error: Quartus Prime Analysis & Synthesis was unsuccessful. 2 errors, 42 warnings
Error: Peak virtual memory: 1674 megabytes
Error: Processing ended: Wed May 24 17:15:45 2017
Error: Elapsed time: 00:09:19
Error: Total CPU time (on all processors): 00:04:50
I will be very appreciate if some one can help me out how to fix this problem.