Not sure exactly who to contact about this?
I’m trying to use the new binaries, the original link doesn’t exist and gives 404: https://releases.rocketboards.org/release/2017.05/gsrd/bin/linux-socfpga-gsrd-17.0-cv.tar.gz
This does exist here (add ‘std’ after 17): https://releases.rocketboards.org/release/2017.05/gsrd/bin/linux-socfpga-gsrd-17.0std-cv.tar.gz
but when I try and load the sdimage provided it does not boot and hangs…
U-Boot 2013.01.01-00137-g95ab599 (May 02 2017 - 05:11:30)
CPU : Altera SOCFPGA Platform
BOARD : Altera SOCFPGA Cyclone V Board
I2C: ready
DRAM: 1 GiB
MMC: ALTERA DWMMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: mii0
Hit any key to stop autoboot: 0
reading u-boot.scr
200 bytes read in 4 ms (48.8 KiB/s)
## Executing script at 02000000
reading soc_system.rbf
7007204 bytes read in 344 ms (19.4 MiB/s)
altera_load: Failed with error code -4
## Starting application at 0x3FF79584 ...
## Application terminated, rc = 0x0
reading zImage
4098640 bytes read in 198 ms (19.7 MiB/s)
reading socfpga.dtb
25180 bytes read in 7 ms (3.4 MiB/s)
## Flattened Device Tree blob at 00000100
Booting using the fdt blob at 0x00000100
Loading Device Tree to 03ff6000, end 03fff25b ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 4.1.33-ltsi-altera (esv@eswdmz3) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #1 SMP Tue May 2 05:08:39 MYT 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Altera SOCFPGA Cyclone V
[ 0.000000] Truncating RAM at 0x00000000-0x40000000 to -0x2f800000
[ 0.000000] cma: Reserved 16 MiB at 0x2e800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 12 pages/cpu @ee1d3000 s19648 r8192 d21312 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 193040
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 745748K/778240K available (6285K kernel code, 430K rwdata, 1664K rodata, 424K init, 141K bss, 16108K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc07cb96c (7951 kB)
[ 0.000000] .init : 0xc07cc000 - 0xc0836000 ( 424 kB)
[ 0.000000] .data : 0xc0836000 - 0xc08a18e0 ( 431 kB)
[ 0.000000] .bss : 0xc08a18e0 - 0xc08c5050 ( 142 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C: platform modifies aux control register: 0x02060000 -> 0x32460000
[ 0.000000] L2C: platform provided aux values permit register corruption.
[ 0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[ 0.000000] L2C-310: CACHE_ID 0x410030c9, AUX_CTRL 0x76460001
[ 0.000000] clocksource timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.000005] sched_clock: 32 bits at 100MHz, resolution 10ns, wraps every 21474836475ns
[ 0.000389] Console: colour dummy device 80x30
[ 0.000407] Calibrating delay loop... 1836.64 BogoMIPS (lpj=9183232)
[ 0.060253] pid_max: default: 32768 minimum: 301
[ 0.060342] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.060353] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.060855] CPU: Testing write buffer coherency: ok
[ 0.060882] ftrace: allocating 20923 entries in 62 pages
[ 0.089200] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.089431] Setting up static identity map for 0x8280 - 0x82d8
[ 0.150279] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.150345] Brought up 2 CPUs
[ 0.150359] SMP: Total of 2 processors activated (3679.84 BogoMIPS).
[ 0.150365] CPU: All CPU(s) started in SVC mode.
[ 0.150772] devtmpfs: initialized
[ 0.156276] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.156543] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.158579] NET: Registered protocol family 16
[ 0.160094] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.167132] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.167144] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.202956] vgaarb: loaded
[ 0.203209] SCSI subsystem initialized
[ 0.203473] usbcore: registered new interface driver usbfs
[ 0.203535] usbcore: registered new interface driver hub
[ 0.203605] usbcore: registered new device driver usb
[ 0.203775] sopc@0:usbphy@0 supply vcc not found, using dummy regulator
[ 0.260297] lcd-comm 0-0028: LCD driver initialized
[ 0.260604] pps_core: LinuxPPS API ver. 1 registered
[ 0.260612] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.260639] PTP clock support registered
[ 0.260808] FPGA manager framework
[ 0.261816] Switched to clocksource timer
[ 0.292030] NET: Registered protocol family 2
[ 0.292570] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.292639] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.292748] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.292822] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.292878] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293069] NET: Registered protocol family 1
[ 0.293414] RPC: Registered named UNIX socket transport module.
[ 0.293422] RPC: Registered udp transport module.
[ 0.293428] RPC: Registered tcp transport module.
[ 0.293433] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.293956] CPU PMU: Failed to parse /sopc@0/pmu0/interrupt-affinity[0]
[ 0.293992] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 0.294789] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.305965] NFS: Registering the id_resolver key type
[ 0.306005] Key type id_resolver registered
[ 0.306012] Key type id_legacy registered
[ 0.306064] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.306373] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.307249] io scheduler noop registered (default)
[ 0.311103] dma-pl330 ffe01000.dma: Loaded driver for PL330 DMAC-341330
[ 0.311119] dma-pl330 ffe01000.dma: DBUFF-512x8bytes Num_Chans-8 Num_Peri-32 Num_Events-8
[ 0.314800] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.315814] console [ttyS0] disabled
[ 0.315852] ffc02000.serial: ttyS0 at MMIO 0xffc02000 (irq = 24, base_baud = 6250000) is a 16550A
[ 0.900530] console [ttyS0] enabled
[ 0.905502] brd: module loaded
[ 0.908615] at24 0-0051: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
[ 0.916127] cadence-qspi ff705000.flash: Read data capture delay for 100000000 baud calibrated to 4 (2 - 5)
[ 0.925865] cadence-qspi ff705000.flash: n25q512ax3 (65536 Kbytes)
[ 0.932193] 2 ofpart partitions found on MTD device ff705000.flash
[ 0.938348] Creating 2 MTD partitions on "ff705000.flash":
[ 0.943826] 0x000000000000-0x000000800000 : "Flash 0 Raw Data"
[ 0.950347] 0x000000800000-0x000004000000 : "Flash 1 jffs2 Filesystem"
[ 0.957547] cadence-qspi ff705000.flash: Cadence QSPI NOR flash driver
[ 0.965753] CAN device driver interface
[ 0.970322] c_can_platform ffc00000.can: c_can_platform device registered (regs=f00a0000, irq=38)
[ 0.979623] stmmaceth ff702000.ethernet: snps,phy-addr property is deprecated
[ 0.986894] stmmac - user ID: 0x10, Synopsys ID: 0x37
[ 0.991936] Ring mode enabled
[ 0.994977] DMA HW capability register supported
[ 0.999484] Enhanced/Alternate descriptors
[ 1.003841] Enabled extended descriptors
[ 1.007832] RX Checksum Offload Engine supported (type 2)
[ 1.013298] TX Checksum insertion supported
[ 1.017546] Enable RX Mitigation via HW Watchdog Timer
[ 1.028724] libphy: stmmac: probed
[ 1.032136] eth0: PHY ID 00221611 at 4 IRQ POLL (stmmac-0:04) active
[ 1.038833] ffb40000.usb supply vusb_d not found, using dummy regulator
[ 1.045488] ffb40000.usb supply vusb_a not found, using dummy regulator
[ 1.091840] dwc2 ffb40000.usb: EPs: 16, dedicated fifos, 8064 entries in SPRAM
[ 1.951994] dwc2 ffb40000.usb: DWC OTG Controller
[ 1.956706] dwc2 ffb40000.usb: new USB bus registered, assigned bus number 1
[ 1.963764] dwc2 ffb40000.usb: irq 36, io mem 0x00000000
[ 1.969285] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.976058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.983257] usb usb1: Product: DWC OTG Controller
[ 1.987942] usb usb1: Manufacturer: Linux 4.1.33-ltsi-altera dwc2_hsotg
[ 1.994535] usb usb1: SerialNumber: ffb40000.usb
[ 1.999693] hub 1-0:1.0: USB hub found
[ 2.003518] hub 1-0:1.0: 1 port detected
[ 2.007916] usbcore: registered new interface driver usb-storage
[ 2.014268] mousedev: PS/2 mouse device common for all mice
[ 2.022153] rtc-ds1307 0-0068: SET TIME!
[ 2.029981] rtc-ds1307 0-0068: rtc core: registered ds1339 as rtc0
[ 2.036212] i2c /dev entries driver
[ 2.040229] watchdog: Invalid min and max timeout values, resetting to 0!
[ 2.047407] Synopsys Designware Multimedia Card Interface Driver
[ 2.053628] dw_mmc ff704000.flash: IDMAC supports 32-bit address mode.
[ 2.060211] dw_mmc ff704000.flash: Using internal DMA controller.
[ 2.066298] dw_mmc ff704000.flash: Version ID is 240a
[ 2.071364] dw_mmc ff704000.flash: DW MMC controller at irq 35, 32 bit host data width, 1024 deep fifo
[ 2.080787] dw_mmc ff704000.flash: Got CD GPIO
[ 2.121855] dw_mmc ff704000.flash: 1 slots initialized